The above control board is housed in a white plastic box for greater protection. Due to the fact that it does not accept safety photocells, it is not suitable for use in garage door automation.

• Automatically recognizes the limit switches of the mechanisms.
• Accepts mechanisms with a maximum power of 500W/250VAC.
• Features an integrated remote control receiver operating at 433.92 MHz and can accept up to 250 remote controls. 
• Has an input for a command button. 
• Operating temperature: -10 to +50 °C.
• Does not have an automatic closing function.
• Does not accept safety photocells.
• Does not accept a warning light.
• Simple installation, wiring, and remote control programming.
• External box dimensions: 100x70x31 mm.
• CE marking

 

Registering remote controls on the Autotech S-2055 control board

The process of storing remote controls on the Autotech S-2055 control board is as follows: Press the LEARN button once. The LED light turns on for 10 seconds. Within this time, press the button on the remote control that you want to store. The control board stores it. 

If the capacity of the control board has been exceeded, then when you register the next remote control (beyond 250), it will take the place of the first remote control. (the one that was stored first chronologically)

After 10 seconds, the LED light turns off and the control board returns to its normal operation.

If you want to delete all remote controls from the control board, press and hold the LEARN button for 10 seconds. After 10 seconds, the control board's memory is cleared.