• NORTON-1000-OIL oil bath sliding gate opener for 1000kg gates with all its accessories:

1. Motor mounting base with screws and anchors
2. Manual release keys (2 pcs)
3. Limit switch activation plates
4. Detailed instructions written in Greek

• ProfelmNet PSD-36T remote control at 433.92 MHz, 1 pc
• Metal rack, 3m

The NORTON-1000-OIL (kit-Economy) set is an basic kit for gate installation that includes only the essential materials. Other materials can be added to it depending on your needs.

Criteria for installing the NORTON-1000-OIL mechanism on your gate

 Sliding gate with mechanism - Characteristics

A classic sliding gate setup with a mechanism naturally includes the gate leaf, which has wheels at its bottom. It is essential that the wheels are well-maintained to avoid hindering the movement of the gate and the mechanism.

The rail, on which the wheels move, is securely fixed to the ground. The rail must be straight, without bumps or deformations.

The gate leaf is held upright by the rollers. The rollers are positioned so that they are always in contact with the gate from the fully open to the fully closed position. They must be stable and not allow the gate to deviate from its path, but without hindering its movement. They are placed at the top of the gate and in the middle of its travel.

The last accessories (for a gate without a mechanism) are the mechanical gate stops. The stops define the gate's travel, i.e., its final position both when opening and closing.

To automate a gate leaf, we install a metal (or plastic) rack. The rack is a toothed rail that works with the motor's gear to transmit movement.

The motor is placed in the center of the gate's travel so that it is always in contact with the gate. It has a gear that transmits movement from the mechanism to the gate via the rack.

Beyond the mechanism, an essential accessory for the safety of the entire construction are the safety photocells. The safety photocells are placed on either side of the opening and check if there is an obstacle in the gate's path. If an obstacle is detected during the gate's closing, the photocells signal the mechanism's control panel, and the gate's closing stops.

Also, for even greater safety, a safety beacon could be installed, which provides a visual signal when the gate is in operation. This is usually installed when the gate is adjacent to busy roads, roads with heavy traffic, and in areas where visibility is limited.

Finally, in cases where the remote controls' range is not desired, an external antenna can be installed to amplify the signal.

Metal rack

The metal rack is delivered in one-meter pieces. It is galvanized for greater resistance to outdoor conditions. The rack's cross-section is 12x30mm, the diametral pitch is 4 (module 4), and it has 3 spacers per piece. It can be installed on gate leaves with a maximum weight of 2 tons.

A key point of attention is the gap that must exist between the gear and the rack. Ideally, this gap should be 1.5mm. 

If this gap does not exist, the mechanism is forced to carry the gate along its entire path instead of simply pushing it. This will cause wear and tear, and sooner or later, problems will arise in its operation. The installation is done by welding it onto the gate.

Conversely, if the gap is too large, the cooperation between the gear and the rack will not be proper, leading to jerks and stress on the motor. Therefore, particular attention is required to create this gap.

Metal gear for NORTON-1000-OIL sliding mechanism

The metal gear reliably transmits movement from the mechanism to the garage door via the rack. It has protection to prevent accidents and trapping of objects between the gear and the rack.

Autotech S5060T control panel for sliding gate mechanisms

The Autotech S5060T control unit is included in the set and is integrated into the mechanism. It is a control unit that combines simplicity of use with all necessary functions and has been time-tested. It combines perfectly with the NORTON-1000-OIL mechanism.

Technical specifications:

• It has a socket for the mechanism's limit switches.
• We can adjust the mechanism's force.
• There is an option for soft start and stop for less wear and tear on the mechanism and garage door.
• It accepts safety photocells which stop movement when they encounter an obstacle during gate closing and initiate reverse movement (opening).
• There is an available setting for automatic gate closing with user-selectable closing start time. The use of photocells is essential for the automatic closing function.
• There is an option for electric braking.
• The opening direction is adjusted with a microswitch.
• The panel can accept push-buttons (key-operated or simple push-button). 
• The panel can accept a 230VAC warning light without a flasher or a 230VAC lighting lamp.
• It has a built-in receiver with simple operation.
• User information regarding the mechanism's functions is provided by LED lights.

The above control unit has been tested by thousands of users and has proven to be extremely reliable. In addition, it features functions such as force adjustment, soft start and stop, making it one of the best choices on the market today.

ProfelmNet PSD-36T remote controls at 433.92 MHz.

The ProfelmNet PSD-36T remote controls have an excellent design and are user-friendly and simple to use and program. They have been tested by thousands of users and do not show problems. They can receive up to four commands from different mechanisms, which makes them convenient for users who have more than one automation in their daily use. 

Sliding mechanism installation procedure - Summary

 In summary, the steps for installing a sliding gate mechanism are as follows:

• Checking that the gate operates smoothly manually.
• Checking existing wiring or installing new wiring.
• After checks, the motor base is installed. This requires a stable foundation. Usually, a reinforced concrete base is the appropriate solution.
• Mounting the motor onto the base.
• Installing the rack.
• Installing accessories (if any)
• Checking proper operation of the setup and explaining all details for safe use to users.

The above are simply a summary of the steps for installing a sliding mechanism. Inside the mechanism's packaging, you will find detailed, step-by-step instructions, well-written and easy to follow. 

Packaging of the NORTON-1000-OIL (kit-Economy) mechanism set

The NORTON-1000-OIL (kit-Economy) set is delivered in two packages. One contains the mechanism, the remote control, and any additional accessories that may have been ordered separately from the set.

The second package contains only the metal rack due to its weight and length.

The set is delivered ready for installation as it has been checked by our technicians and the remote control is configured.

Installation instructions for the sliding gate kit

The set comes with detailed instructions in Greek. These have been edited by us to be easy to follow even by people who are not directly involved in the field.

They contain detailed steps for each stage of installation, from the motor base and the rack to accessories such as photocells and push buttons. Detailed instructions for the Autotech S-5060T control unit, which is integrated into the mechanism, are also included.