Autotech R-2010D control panel (with box) for 230 VAC roller shutter motors with built-in limit switches or sliding garage door motors with NC type limit switches. Accepts safety photocells and a single-command button. Supports automatic closing.
- Single-phase motor (230 VAC)
- Operating frequency: 433.92 MHz
- Compatible remote control encoding: 12 bit fixed code, 24 bit Autotech, 64 bit Keeloq
- Country of origin: Greece
- Board dimensions: 100×88 mm
- Box dimensions: 150x98x40 mm (without flange which can be easily removed: 134x98x40 mm)
Key features of the Autotech R-2010D panel
The Autotech R-2010D control panel (with box) is compatible with 230 VAC roller shutter motors with built-in limit switches or with sliding garage door motors with NC type limit switches.
Key features:
- Automatically recognizes the roller's limit switches. The panel works with motors that have limit switches and cut off power to the mechanism when they reach the end of their travel. When the limit switch cuts off power, the panel automatically detects this and also cuts off the power supply and reverses the next command. That is, if the motor was closing, the next command will be to open and vice versa.
- Automatically recognizes the sliding motor's limit switches. The motor's limit switches are connected to the panel, so when the motor closes, it gives a command to open and vice versa. The panel supports the connection of NC (Normally Closed) contact type limit switches, without voltage ("dry contact"), such as those found on almost all sliding motors with mechanical or magnetic limit switches.
- Supports automatic closing after a user-defined time.
- Features a 24 V AC output for powering accessories (e.g., safety photocells, etc.)
- Features an input for safety photocells.
- Features an input for a command button.
- The procedure for programming remote controls is extremely simple. It has an AUTO LEARN button from which the remote control programming procedure is performed. The remote controls supported by the panel are at a frequency of 433.92 MHz and with 12-bit fixed code, Autotech 24-bit, or KeeLoq rolling code encoding.
- Features LED lights that monitor all panel inputs during both installation and door operation.
- SMD technology.
- CE Declaration of Conformity
- Box dimensions with flange 150x98x40 mm
- Box dimensions without flange 134x98x40 mm (the flange can be easily removed)
- Board dimensions 100×88 mm
The above capabilities and the reliability it offers make it one of the best solutions. It can work with all roller shutter motors that have limit switches that cut off power in the open and closed positions. It can also work with most sliding motors on the market.
Instructions-Documents for Autotech R-2010D control panel
- Autotech R-2010D control panel installation instructions
- CE Declaration of Conformity for Autotech R-2010D control panel